Car Prep
We cannot over-emphasize how important it is for you to self inspect your car
prior to the event. We will perform an on-site safety inspection before
allowing you to drive; however, you are responsible for the mechanical
condition of your car. This affects your safety and the safety of the others
out on the track with you. Especially if this is your first track event of the
season, we recommend you thoroughly inspect your car or have it inspected at
your local shop before coming to Pacific Raceways. Note that doing so will not
replace our on-site inspection.
All participants should have their vehicle inspected by an certified ASE mechanic before attending a track event. Remember, you will be lapping at what are potentially higher than street speeds, so let's all be safe.
For Alfas only: If you want a shop inspection of your Alfa, below is a list of local shops where you can make an appointment for a vehicle inspection prior to the event.
- Tacoma:
Alfa of Tacoma
615 Saint Helens Avenue
Tacoma, WA 98402
(253) 572-2532 - Central Seattle:
Ferrari of Seattle
1401 12th Avenue
Seattle, WA 98122
(206) 329-7070 - Tacoma:
Bristow's Exclusive Auto Repair
4731 S. Washington
Tacoma, WA 98409
(253) 471-1663
TopHave your ASE certified mechanic inspect the following items.
TIRES
No cracks or bends in the wheels
No cracks or cuts in the tires
Tire tread depth at least 50%
Lugnuts present and torqued
SUSPENSION
Wheel bearings properly adjusted
No evidence of looseness in steering components
Lower trailing arm to radius arm tight
Tie rods secure
Ball joints in working order
Front and rear shock mounting bolts tight
Trailing arms secure
Inner and outer CV Joint bolts tight
Axle boots and oil seals in good condition
BRAKES
Remaining % of front brake pads LF% RF%
Remaining % of Rear brake pads LR% RR%
Brake rotors within serviceable limit
Brake fluid reservoir full with clean brake fluid
Brake lines in working order
ENGINE & DRIVE TRAIN
No apparent leaks of any fluids
Belts/pulleys properly adjusted and good condition
Throttle return spring(s) in working order
Hoses (fuel, water etc) properly clamped
Exhaust system securely attached
Battery(ies) securely fastened
No evidence of battery leaking or corrosion damage
Driveshaft in working order
Steering gear attachment in working order
No cracks/tears in engine/transmission mounts
BODY & COCKPIT
No glass cracks longer than 4 inches
Modifications to aerodynamics secure
Pedals operate correctly with positive return
Seat/frame mounts in good condition
Seat belts/harness in good working order
Latches secure doors/hood/trunk tightly
All brake lights working properly
Roll Bar/Roll Cage in good condition
Aftermarket convertible roll-bar correct height
